Avionics
Batteries
Books & Videos
Charts
Composite Materials
Covering Supplies
Electrical
ELTs
Engine Parts
Flight Training
Flight Planning
Gifts
GPS
Hardware
Headsets
Instruments
Landing Gear
Metals & Plastics
Pilot Supplies
Radios
Tires & Tubes
Tools
Wood Products
Kits & Plans
FBO Supplies
Liqui Moly AERO
Catalogs
Electronics International CGR 6 Cylinder Primary R
| Part number: | 10-05430 |
| Model Number | Description | Part Number |
| CGR-30P-4-B | 4-Cylinder Basic Package with RPM, Fuel Flow, EGT/ CHT Bar Graph, Fuel Remaining, Volts, OAT, Tach Time, Local Time, Zulu Time, Flight Timer, Fuel Used for the Flight, Fuel Used Since Fill-up and all GPS/Fuel Flow Data. | 10-05428 |
| CGR-30P-4-P | 4-Cylinder Premium Package with RPM, EGT/CHT Bar Graph, Fuel Remaining, Fuel Used, FPS/Fuel Flow Data, Engine Time, Tach Time, 5 Primary Functions of your choice and 5 Non-Primary functions of your choice. | 10-05429 |
| CGR-30P-6-B | 6-Cylinder Basic Package with RPM, Fuel Flow, EGT/ CHT Bar Graph, Fuel Remaining, Volts, OAT, Tach Time, Local Time, Zulu Time, Flight Timer, Fuel Used for the Flight, Fuel Used Since Fill-up and all GPS/Fuel Flow Data. | 10-05430 |
| CGR-30P-6-P | 6-Cylinder Premium Package with RPM, EGT/CHT Bar Graph, Fuel Remaining, Fuel Used, FPS/Fuel Flow Data, Engine Time, Tach Time, 5 Primary Functions of your choice and 5 Non-Primary functions of your choice. | 10-05431 |
IMPORTANT: Marking requirement form must be filled out at time of ordering. Please click the link below to download the PDF form. It must be faxed in to 951-372-0555 or emailed in before order can be processed.
CGR-30P Basic Package Marking and Configuration Requirements Form (PDF)
CGR-30P Premium Package Marking and Configuration Requirements Form (PDF)
Easily replace several of your aircrafts primary and non-primary engine instruments
with one EI CGR For example, simply replace your existing tach with a CGR. In
addition to replacing our tachometer, the STCd CGR will replace MANY of your
existing primary and non-primary instruments in the same instrument, in the one
3-1/8 hole. The CGR mounts flush with your panel and doesnt protrude from your
panel (as competitors gauges do).
Available Functions:
The CGR-30P comes standard with a state-of-the-art, fullcolor bar graph which assists with ROP/LOP leaning. Additionally, the bar graph has both normalized and digital readout screens. No other bar graph in the industry comes close to providing the number of options the CGR-30P offers. In addition to its bar graph, the CGR-30P can be configured to display a combination of the functions listed below.
|
RPM |
Fuel Pressure |
Flight Timer |
Available Screens:
In addition to the Main Screen, the CGR-30P offers a Secondary Screen, a Fuel Quantity Screen and a GPS Data Screen. These additional screens give the CGR-30P flexibility not found in any other engine instrument.
Secondary Screen
This screen provides six additional
functions to be displayed on the
CGR-30P, as well as annunciators
to display Main Screen alerts.
GPS Data Screen
This screen allows you to select
between six sets of Fuel Flow,
Fuel Remaining and GPS
related data.
Fuel Quantity Screen
This screen displays the
estimated Fuel Remaining
for each tank, based on
current Fuel Flow.
- 3.25 x 3.25 x 4.45 Depth
- Weight: 1.1 Lbs.
- Display of Primary and Non-Primary Gauges without Red and/or Yellow Ranges: Five on the Main Screen + EGT and CHT. Six on the Secondary Screen.
- Environmental: Designed and Tested to TSO (DO-160G)
- Software: Designed and Documented to TSO (DO-178B, Level C)
- Minimum Performance Standards: TSO-C43c, TSO-C44c, TSO-C45b, TSO-C47a, TSO-C48a, TSO-49b and TSO-C55a.
- Power Requirements: 7.5 to 30 Volts, 0.1 amps @ 24V (Typ), 0.2 amps @ 12 Volts
- (Typ).
- USB Port: For USB Memory Stick use only.
- Display: Active Matrix TFT, 262,144 colors, Sunlight readable
- Backlight: External control line, programmable levels.
- Display of Primary Gauges with Red and/or Yellow Ranges: Five on the Main Screen + EGT and CHT. One on the Secondary Screen.
Q+A
Can the engine harness of my existing E.I. UBG 16 be used for the CGR-30 instrument?
Yes you can use the same probes but E.I. does not have plans to sell a unit only at this time.
Can MP be added to the EI CGR-30-B?
No, manifold pressure only comes in the CRG-30-P and cannot be added to the -B verion.
Does the EI CGR-30P-6-P come with all senders (RPM, EGT/CHT, Fuel flow, others)?
The CGR30P-6-P allows for 6 primary engine functions and the 6 you select will come with the required probes.
| Unit | EA |
| Hazardous | No |
| Oversize | No |
| Weight | 2.722 kg |
 | Call us at +49 7634 9057700 from 08:00 to 13:00 CET |
