Part number: | 02-19280 |
Not available for sale in Europe
unknown |
American-made structural aircraft-grade plywood is made of imported African Mahogony veneers laminated in a hot press to hardwood cores of Poplar or Bass wood with waterproof glue. Will meet all requirements of specification MIL-P-6070, which calls for shear testing after immersion in boiling water for 3 hours. Far superior to many plywoods in which all plies are 1/16 inch thick and laminated in a cold press to make up the total thickness. Tests should be made on cold press plywoods before use on aerobatic aircraft. Available in 45° and 90°
Attention
90° 2' x 4' Plywood are cut with grain.
If cross cut required, specify at time of order
Size | Degree | Part No. |
1/16x2x4 | 90° | 02-18930 |
1/16x4x4 | 90° | 02-18910 |
1/16x2x8 | 90° | 02-18920 |
1/16x4x8 | 90° | 02-18980 |
3/32x2x4 | 90° | 02-19130 |
3/32x4x4 | 90° | 02-19110 |
3/32x2x8 | 90° | 02-19120 |
3/32x4x8 | 90° | 02-19180 |
1/8x2x4 | 90° | 02-19330 |
1/8x4x4 | 90° | 02-19310 |
1/8x2x8 | 90° | 02-19320 |
1/8x4x8 | 90° | 02-19380 |
3/16x2x4 | 90° | 02-19530 |
3/16x4x4 | 90° | 02-19510 |
3/16x2x8 | 90° | 02-19520 |
3/16x4x8 | 90° | 02-19580 |
1/4x1x2 | 90° | 02-00064 |
1/4x2x4 | 90° | 02-19730 |
1/4x4x4 | 90° | 02-19710 |
1/4x2x8 | 90° | 02-19720 |
1/4x4x8 | 90° | 02-19780 |
5/16x2x4 | 90° | 02-19830 |
5/16x4x4 | 90° | 02-19810 |
5/16x2x8 | 90° | 02-19820 |
5/16x4x8 | 90° | 02-19880 |
3/8x2x4 | 90° | 02-19930 |
3/8x4x4 | 90° | 02-19910 |
3/8x2x8 | 90° | 02-19920 |
3/8x4x8 | 90° | 02-19980 |
7/16x2x4 | 90° | 02-12030 |
7/16x4x4 | 90° | 02-12010 |
7/16x2x8 | 90° | 02-12020 |
7/16x4x8 | 90° | 02-12080 |
1/2x2x4 | 90° | 02-12130 |
1/2x4x4 | 90° | 02-12110 |
1/2x2x8 | 90° | 02-12120 |
1/2x4x8 | 90° | 02-12180 |
1/16x2x4 | 45° | 02-18830 |
1/16x4x4 | 45° | 02-18810 |
1/16x2x8 | 45° | 02-18820 |
1/16x4x8 | 45° | 02-18880 |
3/32x2x4 | 45° | 02-19030 |
3/32x4x4 | 45° | 02-19010 |
3/32x2x8 | 45° | 02-19020 |
3/32x4x8 | 45° | 02-19080 |
1/8x2x4 | 45° | 02-19230 |
1/8x4x4 | 45° | 02-19210 |
1/8x2x8 | 45° | 02-19220 |
1/8x4x8 | 45° | 02-19280 |
1/2x4x8 | 45° | 02-00077 |
Q+A
What does the designation 90 degree or 45 degree refer to on the domestic mahogany plywood?
It is in reference to the grain direction. 90* material, the grain runs from left to right, parallel to the 8' edges. 45* material, the grain runs 45* from 8' edge, some describe it as the grain running from corner to opposite corner in a 4' x 4' section.
Unit | SH |
Hazardous | No |
Oversize | Yes |
Weight | 6.350 kg |
Call us at +49 7634 9057700 from 08:00 to 13:00 CET |