Part number: | 10-01191 |
Engine and System Monitoring:
The MVP-50P replaces over 15 Engine Instruments and 50 Functions in a single, full color, enhanced TFT glass display instrument. It features excellent viewability, even in direct sunlight. The MVP-50 is an unrivaled Engine and Aircraft System Monitor with an easy-to-read and easy-to-use format. There are Pilot-Programmable colors, ranges and limits and a voice alarm for each instrument displayed. Its System Page displays trims, flaps, wheel status lights, many system parameters and annunciators. This is the most powerful engine and system analyzer on the market, featuring the following displays: Bar Graph (with Scan and Hottest Cylinder modes), Rich-of-Peak, Lean-of-Peak, Full Digital, Normalized and Differential. The MVP-50Ps instant red and yellow visual warnings, as well as voice annunciators for all Programmed Limits, eliminate the need to constantly scan an entire panel for possible problems.
In-Flight Data:
The MVP-50P provides many Flight Data Screens to reduce cockpit clutter and pilot workload. Some of these screens are: Fuel Management, Timers, Clocks and Date, Weight and Balance, Data Recording, Custom Checklists (Start, Taxi, Run-up w/ Mag Drop, Take Off, Landing, Emergency and more!), Custom Flight Plans, General Information (Aircraft Performance, Engine Diagnostics, VSI Lights, Airspeed, VFR Minimums, Altitude Table, Light Gun Signals, Transponder Codes, Frequencies, Real-Time Out (providing telemetry for UAV racers, etc.), plus additional Screens, including: Flight Log, Max Data Log, Min Data Log and others. And its easy to create your own Custom Screens and download them to the MVP-50P through its USB port. Compatible with OP Technologies and Chelton. EGView Charting Software is also available for use with the MVP-50P.
Other Functions Included:
Help Screen; EGT & CHT Differentials; Shockcooling; Horsepower; Weight & Balance Data and Graph; GPS Interface and Data; Fuel Efficiency; Fuel Used for Trip; Fuel Used Since Fill Up; Time to Empty; Distance to Empty; Fuel; Time and Distance to Way Point; Fuel Reserve; Time Reserve; Distance Reserve; Up and Down Timers; Flight and Tach Timers; Engine Hours; Date; Local and Zulu Time; Voice Warnings; Data Recording: selectable .33 6 min., 665 hours @ 6 seconds!
CHT PROBES | ||||
Model | Description | Part No. | ||
P-100-MVP |
| 10-03212 | ||
P-101MVP |
| 10-03213 | ||
A-101MVP | CHT Adaptor for P-101 Probe, 3/8-24 | 10-03216 | ||
P-102-18-MVP |
| 10-03214 | ||
P-102-14-MVP | CHT PROBE, 14 mm. Gasket Type 700°F Max. | 10-03217 | ||
P-102-12-MVP | CHT PROBE, 12 mm. Gasket Type 700°F Max. | 10-03218 | ||
P-102-3/8-MVP | CHT PROBE, 3/8" Piggy-Back Gasket Type 700°F Max. | 10-03219 | ||
P-110-MVP | EGT/TIT PROBE, Hose Clamp Type. Used with 13/64" Hole. Std w/ most kits. Wt: 1.6 oz. | 10-03220 | ||
P-110-F-MVP |
| 10-03221 | ||
P-111-MVP | EGT/TIT PROBE 1/8" NPT,< with Adjustable Depth. (Also approved for Oil Temp) | 10-03222 | ||
P-111-F-MVP | Fast Response TIT probe, 1/8 NPT, .187 D | 10-03223 | ||
P-112-MVP |
| 10-03224 | ||
P-114-MVP | EGT/TIT Probe, 1/4" NPT, with Adjustable Depth. (Also approved for Oil Temp) | 10-03225 | ||
P-114-F-MVP | Fast Response EGT/TIT Probe, 1/4" NPT, with Adjustable Depth. (Also approved for Oil Temp) | 10-03226 | ||
P-120-MVP |
| 10-03227 | ||
P-128-MVP | OAT/CARB Temp Probe. FAST Response/Exposed Tip, Uses a Precision connector, 700°F Max. | 10-03228 | ||
XDS-6' | One 6 ft TC harness w/ crimped D-Sub pins. Use to interface any temperature Probe to the MVP system. Specify length at time of order. | 10-03192 |
Accessories for MVP Packages | ||||
Model | Description | Part No. | ||
EGView | Charting Software. Use for analyzing and downloading data to the MVP-50P. | 10-01219 | ||
USB-128 | USB Memory Stick, 128MB or used to upload and download data to the MVP-50P | 10-03186 | ||
CP-1-MVP | LED Intensity Control Pot. External pot used to control the display intensity. | 10-03211 | ||
EDC-33P-4/6 | 4/6 Cylinder Engine Data Converter. Adding a second EDC to the MVP allows. Additional pressures, annunciators and other functions to be monitored on the MVP (uses the Input Port 3 on the MVP). | 10-03184 |
Fuel Level Probes | ||||
Model | Description | Part No. | ||
RFLM-4-12 | Resistive Fuel Level Module. Must be used w/ EIs EDC to measure up to 4 Resistive Fuel Level Sensors. | 10-02772 | ||
RFLM-4--24 | 10-03231 | |||
P-300C 10-03194 | 3/4 Capacitive Fuel Level Probe w/ Accessories. (see our Accessories Page for details.) Specify Probe length at time of order. | 10-00382 | ||
P-300C-Mini-1/8 | 3/16 Capacitive Fuel Level Probe (see the Accessories Page for details) | 10-03193 | ||
P-300C-Mini- 1/4 | 10-00382 |
Fuel Flow Transducers & Modules | ||||
Model | Description | Part No. | ||
FT-60 | Fuel Flow Transducer (Red Cube), .6 to 70+ GPH | 10-01196 | ||
FT-90 | Fuel Flow Transducer (Gold Cube), 3 to 125+ GPH | 10-01224 | ||
FT-180 | Fuel Flow Transducer (Black Cube), 5 to 250+ GPH | 10-01997 | ||
FFDM-1-MVP-FT60 | Fuel Flow Differential Module for aircraft w/ a pressure carburetor. Includes FT-60 or FT-90 transducer to measure the returned fuel. Please Choose the FT-60 or FT-90 at time of your order. | 10-03244 | ||
FFDM-1-MVP-FT90 | 10-03245 | |||
FM-FLOW-P | Measures Fuel Flow from a pulsed injector signal. | 10-03206 |
Volts & Amps Modules & Shunts | ||||
FM-VA-MVP-50 | Volts/Amps Module. Allows any temperature or pressure channel on EIs EDC to measure Voltage and Current on a separate bus. Comes w/ an S-50 or S-300 shunt. | 10-03247 | ||
FM-VA-MVP-300 | 10-03248 |
Pressure Transducers & Modules (Each include a Ccl-4D-6' Harness when ordered with the MVP-50 or MVP-50T | ||||
Model | Description | Part No. | ||
PT-30GA-MVP | Pressure Transducer, 1/8 NPT Male 0 to 40 PSI, Max. Over Pressure 90 PSI, Burst Pressure 120 PSI, Shock 100g, Material 316L stainless steel, 8 oz. | 10-03232 | ||
PT-100GA-MVP | Presssure Transducer, 1/8 Male, 0 to 120 PSI, Max. Over Pressure 300 PSI, Burst Pressure 400 PSI, Shock 100g, Material 316L stainless steel, 8 oz. | 10-03233 | ||
PT-300GA-MVP | Pressure Transducer, 1/8 NPT Male,> 0 to 300 PSI, Max. Over Pressure 900 PSI, Burse Pressure 1200 PSI, Shock 100g, Material 316L stainless steel, 8oz. | 10-03235 | ||
PT-3000S-MVP | Pressure Transducer for Hydraulics, 1/8" NPT Male, 0 to 3000 PSI, Max. Over Pressure 9000 PSI, Burst Pressure 10000 PSI, Shock 100g, Material 316L stainless steel, 8 oz. | 10-03236 | ||
PT-30ABS-MVP | Absolute Pressure Transducer, 0 to 36 In Hg (Manifold Press or Cabin Altitude) | 10-03238 | ||
PT-30ALT-MVP | Altitude Transducer | 10-03239 | ||
PT-60ABS-MVP | Absolute Pressure Transducer, 0 to 70 In Hg (Manifold Pressure) | 10-03240 | ||
PT-05DIFF-MVP | Differential Pressure Transducer, 0 to 60 In Hg (Vac Pressure or Cabin Diff Pressure) | 10-03241 | ||
PT-04H20-MVP | Differential Pressure Transducer, 0 to 5 In H20 | 10-03242 | ||
FM-PR-MVP | Allows an EDC temperature channel to measure a pressure (operates w/ any EI MVP Pressure Transducer). Pressure transducer sold separately. | 10-03204 | ||
DPIM-1-30-MVP | Differential Pressure Interface Module for aircraft that require fuel pressure to be Measured in reference to the upper deck. Includes a PT-30GA pressure transducer to measure the upper deck pressure. | 10-03205 | ||
CBL-4D-6' | One 6 4-wire cable with crimped D-Sub pins. Used to interface any pressure transducer, fuel flow transducer or fuel level probe to the MVP system. | 10-03183 |
MVP SCREEN ANNUNCIATOR INTERFACE UNITS | ||||
Model | Description | Part No. | ||
VI-221 | Voltage Interface Unit. Allows any temperature or fuel level channel on our EDC to measure the output voltage of any device. This voltage measurement can then be used to drive an annunciator (Canopy Latch, Gear Lights, Baggage Door, etc.) that will be displayed on the MVP screen. | 10-03187 |
Unit | EA |
Hazardous | No |
Oversize | No |
Weight | 5.897 kg |
Alternative P/N | MVP-50P-6 |
Call us at +49 7634 9057700 from 08:00 to 13:00 CET |